The evening wrenching went well, until we looked at the list around 11:00 and saw all the stuff we forgot to do. Oh well.
- Matt sanded the fins on the lower part of the top end.
- The kick stand support was ground down and the frame stuffed in the trunk of the TDI for welding tomorrow.
- We disassembled the other fork and replaced the oil seal.
- I cleaned the fork lowers and prepped for paint. We settled on painting only the top half of the bottom end of the engine in aluminum colored paint.
- Here Matt is putting on the primer coat ahead of paint.
6. The fingerprints on the tank in the clear coat were getting to Matt so he decided to clean it again with acetone and respray it.
No comments:
Post a Comment